Description of Base Oil

MSM International is one of the leading producers of base oil SN 500 the most widely used base oil. SN 500 is a light grade base oil at the upper end of the specifications for Grade I base oils. They are mainly used in lubricant production.

It is a Group I base oil that has undergone solvent refining and dewaxing processes. It is the workhouse ingredient for formulators and blenders of lubricants for passengers and commercial vehicles, as well as industrial applications. This oil has no impurities or compounds that can have an adverse effect on the quality of the oil.

Originating in the 1930s, the least refined type which is produced by Solvent Refining. It usually consists of conventional petroleum base oils. An improvement to the refining process in the 1960s called hydro-treating made this base oil more stable, less reactive, and longer-lasting than the earlier base oils.

API defines group I as “base stocks contain less than 90 percent saturates and/or greater than 0.03 percent sulfur and have a viscosity index greater than or equal to 80 and less than 120”.

Uses of Base Oil SN 500

MSM International is one of the leading suppliers of base oil Group I according to the American Petroleum Institute (API), which contains less than 90 percent saturates and has a viscosity index greater than or equal to 85 and less than 120. In MSM International refinery diverse grades of Base Oil are produced by means of solvent refining paraffinic crude oil as below, with modern production facilities and using high-quality raw materials. Base oils are used to manufacture products including motor oil, Industrial oil, Grease, and etc.

Motor oil

Industrial oil

Lubricating greases

Metal processing fluids

Additives

Hydraulic oils

Transformer oils

Coating

Medicine

Paints

Packing of SN 500

Base oil packed in new or used 180 kg drums, iso tank, Flexitanks, and bulk shipments. Each 20-foot container takes 80 drums.

Handling health & Safety

Lubricants consisting of highly refined mineral oils with specification additives. In normal conditions of use, this lubricant presents no particular toxic hazard. All lubricants, of any kind should be handled with great care, particularly avoiding can contact with the skin. Prevent any splashing, and keep away from combustible materials. Store undercover and away from any risk of pollution. Dispose of the used oil correctly; don’t pour down drains, into watercourses or the soil.

Property Unit Test Method Specification Typical Result
Appearance - Visual C & B C & B
Color - ASTM D-1500 Max 2 1.8
Density at 15°C kg/m3 ASTM D-4052 - 893
Kinematic viscosity at 40°C mm2/s (CST) ASTM D-445 - 108
Kinematic viscosity at 100°C mm2/s (CST) ASTM D-445 Min 10.8 10.9
Viscosity index - ASTM D-2270 Min 87 88
Flashpoint °C ASTM D-92 Min 235 245
Pour point °C ASTM D-97 Max -3 -4
Noack at 250°C wt % ASTM-D-5800 Max 5 3.5
Sulfur wt % ASTM D-4951 - 1.2