Description of Base Oil
SN 150

MSM International is one of the leading producers of virgin base oil SN 150, is base oil categorized in group I is a common quality base oil product of MSM International which uses in different applications base oils SN150 are used to manufacture products including lubricating greases, motor oil, and metal processing fluids, and many other applications One of the most important ISSUE is the viscosity at various temperatures. Whether or not a crude oil is suitable to be made into a base oil is determined by the concentration of base oil molecules as well as how easily these can be extracted. This oil has no impurities or compounds that can have an adverse effect on the quality of the oil.

MSM International SN 150 is highly refined paraffinic oils that are processed to meet high saturation and low sulfur concentration. These products have good solubility characteristics for additives in product formulations.

Uses of Base Oil SN 150

MSM International is one of the leading suppliers of base oil Group I according to the American Petroleum Institute (API), which contains less than 90 percent saturates and has a viscosity index greater than or equal to 85 and less than 120.

In MSM International refinery diverse grades of Base Oil are produced by means of solvent refining paraffinic crude oil as below, with modern production facilities and using high-quality raw materials.

Base oils are used to manufacture products including motor oil, Industrial oil, Grease, and etc.

General-purpose oils

Mould oil

Transmission fluids

Gear Oils

Metalworking fluids

Additives

Hydraulic Oils

Transformer Oils

Packing of Base Oil

Base oil packed in new or used 180 kg drums, iso tank, flexitanks, and bulk shipments. Each 20-foot container takes 80 drums.

Handling health & Safety

Lubricants consisting of highly refined mineral oils with specification additives. In normal conditions of use, this lubricant presents no particular toxic hazard. All lubricants, of any kind should be handled with great care, particularly avoiding can contact with the skin. Prevent any splashing, and keep away from combustible materials. Store undercover and away from any risk of pollution. Dispose of the used oil correctly; don’t pour down drains, into watercourses or the soil.

SPECIFICATION MIN MAX METHOD
Viscosity @100˚C 4.5 5 ASTM D-445
Viscosity @40˚C 19 24 ASTM D-445
Viscosity Index 100 110 ASTM D-2270
Flash Point ˚C 170 180 ASTM D-92
Pour point 0 0 ASTM D-97
Total Acid Number mgKOH/g 0 0.03 ASTM D-664
Color 1 1.5 ASTM D-1500
Density 0.868 0.874 ASTM D-1298